innr3

What Can You Do After a Short Plumbing Course?

By Stephen Higgins, Plumbing Tutor · Last updated: November 2026

After a short plumbing course you can legally carry out most everyday domestic plumbing: fitting bathroom suites, replacing taps, toilets and basins, running copper and plastic pipework, and swapping radiators. You cannot work on gas appliances unless you’re registered with Gas Safe, you need a G3 qualification to fit unvented hot water cylinders, and new electrical circuits in bathrooms are notifiable under Part P. In England, there is no single general licence for all domestic plumbing, but completing a course does not automatically make you competent to carry out every job for a customer. Some tasks require additional competence, Building Regulations procedures, notification or specialist registration.

The practical question is not just ‘Is there a licence?’ but ‘Can I carry out this particular job safely, to the correct standard, and meet any notification requirements?’ Here is how to assess that boundary.

Knowing where the lines sit protects you, your customers and your business. Here’s what’s open to you and what needs further qualifications.

What needs further qualifications or registration

Work What's required
Any work on gas appliances, boilers, hobs, fires or gas pipework Gas Safe registration. Working on gas without it is illegal, even unpaid.
Installing an unvented hot water cylinder A G3 qualification, and the work must be notified to Building Control or self-certified through a competent person scheme
New electrical circuits, consumer unit changes, or altering circuits in a bathroom (e.g. a new electric shower circuit) Notifiable under Part P — must be certified by a registered electrician or notified to Building Control
Certain water installations Some must be notified to your water supplier before work starts
Site work as a skilled plumber A Blue CSCS card, which requires an NVQ Level 2 or a recognised apprenticeship. Employers might take you on as an improver initially if you have the knowledge and skills to support this, as some of our previous students have progressed into site work.

What you can do

All plumbing must still meet the Water Supply (Water Fittings) Regulations and be done competently, but these jobs need no extra registration:

  • Fitting and replacing bathroom suites: baths, basins, toilets, shower trays and enclosures
  • Replacing taps, valves and toilet mechanisms
  • Installing and altering copper and plastic water pipework
  • Removing, refitting and adding radiators on the wet side of a heating system
  • Repairing leaks and general maintenance
  • Fitting kitchen sinks, waste pipes, dishwashers and washing machines

Gas: the clear line

Under the Gas Safety (Installation and Use) Regulations, only engineers on the Gas Safe Register may carry out gas work, and each engineer may only work on the appliance categories listed on their ID card. This applies whether the work is paid or a favour. Many bathroom fitters simply leave the gas side, such as reconnecting a boiler, to a Gas Safe engineer.

Unvented cylinders

Unvented cylinders contain stored hot water under pressure and have specific safety requirements. Building Regulations Part G3 requires competent design and installation; the relevant work also needs the correct notification or self-certification route. Specialist G3 training and assessment are a common way to demonstrate competence, but the law is not simply a rule that every installer must hold a certificate with ‘G3’ on it. A short general plumbing course is not a substitute.

Electrics in bathrooms

Bathrooms are a “special location” under Part P of the Building Regulations. Installing a new circuit, replacing a consumer unit, or adding to or altering a circuit in a bathroom is notifiable work. Most bathroom fitters work with a registered electrician for this. See Part P and Competent Person Schemes explained.

Where to go next

  1. Get a recognised certificate: our City & Guilds Level 1 plumbing assessment during your 9-day plumbing courses.
  2. Get a CSCS card: see Which CSCS card can I get after a trade course? – If wanted for site work
  3. Work towards an NVQ once you’re working in the trade.
  4. Consider gas training if you want to install and service boilers.

Frequently asked questions

Can I fit a bathroom for a customer after a short course?

Yes, Arrange any gas work, specialist hot-water work or electrical work beyond your competence with appropriately qualified and registered tradespeople; check notification requirements before starting.

Can I connect a radiator to a gas boiler system?

You can work on the water side of a central heating system. Any work on the boiler itself or gas pipework requires Gas Safe registration.

Do I need to register to work as a plumber?

There’s no general licence for domestic plumbing in England. Registration is required for gas work, and some competent person schemes let qualified plumbers self-certify notifiable work.

This guide summarises the position for England and is not a substitute for a job-specific compliance check. Building Regulations differ across UK nations. Check current guidance with Building Control, your water supplier and the relevant specialist regulator before accepting regulated work.

WhatsApp